Acura Recalls 14,648 ZDX EVs Over Brake-Pressure Loss

Acura is recalling 14,648 all-wheel-drive 2024 ZDX electric SUVs in the United States because brake-control software can temporarily reduce or release brake pressure at low speeds, increasing stopping distance and crash risk.
The action is filed as NHTSA campaign 26V735 and Acura campaign CQC. American Honda published its detailed recall notice on November 14, 2026, based on the Part 573 report it submitted to the federal safety regulator.
Which ZDX vehicles are included
The recall covers 2024 Acura ZDX vehicles equipped with all-wheel drive and produced from December 19, 2023, through January 22, 2025. Acura says rear-wheel-drive ZDX models are not affected.
The filing lists an estimated 100% of the 14,648-vehicle recall population as containing the software configuration. That figure does not mean every vehicle has experienced a braking event. Recall eligibility is determined by VIN, so owners should use the official NHTSA recall lookup rather than relying only on model year and trim.
How the software can reduce brake pressure
According to Honda’s filing, the electronic brake control module uses software logic to calculate a vehicle reference speed. That calculation can become unstable when several conditions occur together: wheel slip during a turn, light braking, travel over a road disturbance, and a release and reapplication of the brake pedal.
On a high-friction surface, the software may then incorrectly decide that the wheels are in deep slip and command a reduction in brake pressure. Acura says the result can be a temporary reduction or loss of braking pressure at low speed, without warning. Reduced braking capability can extend the distance required to stop.
General Motors manufactured the affected ZDX vehicles and informed Honda about the software condition, according to the filing. This is a separate campaign from the GM EV brake-software recall Chiefs Review covered under NHTSA campaign 26V717, which involved Cadillac Lyriq and Chevrolet Blazer EV models.
The repair can be installed over the air
Honda will correct the ZDX issue with updated electronic brake control module software. Owners who have accepted the applicable connected-service terms can receive the update wirelessly over the air. Owners can also arrange for an Acura dealer to install the software. The recall repair is free.
Dealer notification was scheduled for November 6. Owner letters are expected around December 14, 2026. Acura’s filing also says owners who previously paid for a qualifying repair may be eligible for reimbursement under the company’s recall reimbursement plan.
The official notice does not issue a stop-driving or park-outside instruction. Owners should still respond promptly when the update becomes available and contact an Acura dealer if they experience a braking concern. Acura customer service can be reached at 1-800-382-2238; the manufacturer campaign number is CQC.
What remains uncertain
The recall filing describes the defect mechanism and remedy but does not provide, in the published Honda notice, a count of crashes, injuries or field incidents tied to this condition. Chiefs Review has not independently tested the affected vehicles or the revised software.
Owners can also review the NHTSA record for campaign 26V735. Because recall databases can take time to reflect a new campaign, a dealer can verify coverage if a VIN result is not yet available.
Sources and image credit
Primary sources: American Honda’s November 14, 2026 recall notice and NHTSA campaign 26V735. Featured image: archive/illustrative photo of a 2024 Acura ZDX A-Spec AWD by Charles, via Wikimedia Commons, licensed under CC BY 2.0. The Commons file was cropped and rotated from the photographer’s original; Chiefs Review made no changes beyond WordPress resizing.