THE ROAD AHEAD. IN FOCUS.Automotive news & culture
CHIEFS REVIEWAUTO /Machines. People.
The stories that move us.

Proton Details i-HEV Hybrid System Ahead of AMA 02 Debut

Illustrative archive photo of Proton City in Tanjong Malim, Malaysia; not the unrevealed AMA 02 vehicle

Proton has named its new gasoline-electric powertrain i-HEV and confirmed that the system will make its production debut in an upcoming vehicle currently known by the AMA 02 codename. The Malaysian automaker’s November 10 announcement details the engine, motors, battery and operating modes, but does not yet identify the vehicle’s production name.

Proton presents i-HEV as a self-charging hybrid: drivers refuel it with gasoline, while the engine and regenerative braking supply energy to a small traction battery. It is not a plug-in hybrid and does not require external charging.

A 1.5-liter Atkinson-cycle engine

The system uses a naturally aspirated 1.5-liter Dedicated Hybrid Engine rated by Proton at 111 PS and 136 Nm of torque. The company claims peak thermal efficiency of 46.5%, supported by Atkinson-cycle operation, a 14:1 geometric compression ratio, water-cooled exhaust-gas recirculation, a variable-displacement oil pump and an electric water pump.

Thermal efficiency describes how effectively an engine converts fuel energy into useful work under a given test condition. Proton has not published an independently verified efficiency result or a vehicle-level fuel-consumption rating for AMA 02, so the engine claim should not be read as a confirmed real-world economy figure.

Two motors and four operating modes

A Dedicated Hybrid Transmission houses two electric motors identified as P1 and P3. Proton says P1 starts the gasoline engine and generates electricity. P3 is the main traction motor, drives the wheels and recovers energy during deceleration.

The main motor is rated at up to 163 PS and 220 Nm. A Power Control Module automatically selects among four operating strategies based on speed, power demand and battery condition:

  • EV Mode uses battery power to move the vehicle electrically when conditions permit.
  • Series Mode runs the engine as a generator while the traction motor drives the wheels.
  • Parallel Mode combines engine and motor power at the wheels.
  • Direct Drive Mode mechanically connects the engine to the wheels when Proton’s controls determine that is more efficient, such as steady-speed cruising.

The driver does not manually select these modes. The control system manages the transitions. Proton has not disclosed combined system output, acceleration figures or a top speed, so the engine and motor ratings should not simply be added together.

A 1.38-kWh battery, with no charging port

Energy is stored in a 1.38-kWh battery used for low-speed electric operation, motor assistance and regenerative-braking recovery. The gasoline engine can also generate electricity when required. That relatively small capacity is consistent with a conventional full hybrid rather than a plug-in vehicle designed for long electric-only trips.

Proton has not published an electric-only range, battery chemistry, charging power, warranty or final fuel-economy figure. It also has not confirmed AMA 02 pricing, launch timing, body style or sales outside Malaysia in this announcement.

Local assembly in Tanjong Malim

Proton says its Tanjong Malim operations produce the dedicated hybrid engine and assemble the hybrid transmission and electric drive unit locally. The company frames that work as a step toward expanding Malaysia’s experience in electrified powertrain assembly, testing and quality control.

For comparison with a hybrid vehicle whose market price and trim structure are already confirmed, see our report on the 2027 Toyota Camry lineup in Canada.

Sources and image credit

Primary source: Proton’s November 10, 2026 i-HEV technical announcement. Featured image is an illustrative archive photo of Proton City in Tanjong Malim—not the unrevealed AMA 02 vehicle—by *angys*, via Wikimedia Commons, licensed under CC BY-SA 4.0.